Edge tile (one chamfered side) FI "Savannah"

€51,00

7-14 days

Plus delivery costs
/
Realisation time approx.
7-14 days
€204,00 / 4 piece / m²
(18,60 kg / piece)

EAN: 4251469338098 | Item no.: 3809

The edge tile with one chamfered side is a useful and system-compatible addition to the rubber granulate tiles type FS. The edge tile is used for avoiding trip hazard that can occur at the transition to the rubber granulate surface in case only one section is paved with rubber granulate slabs. It also helps compensate the level difference between the ground and rubber plates surface. Trip accidents can be avoided and smooth driving on it with a wheelchair, a baby buggy or a rollator is possible.

A typical application case is a play island covered with fall protection tiles in a plastered pavement or an asphalted schoolyard. The edge tile is always stuck together with the underfloor and stabilised with a rubber granulate tile surface.

The product data sheet to print

Edge tile (one chamfered side) von WARCO im Farbdesign Savannah mit den Abmessungen 500 x 500 x 100 mm. Produktfoto von Artikel 3809 in der Aufsicht von schräg vorne.

Detailaufnahme der Randausprägung von WARCO-Produkt 3809, Edge tile (one chamfered side), Format 500 x 500 x 100 mm, Farbe Savannah.

Großaufnahme vom Verbindungssystem von WARCO-Boden 3809 - Edge tile (one chamfered side) im Farbdesign Savannah. Abmessungen 500 x 500 x 100 mm.

Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 3809 - Edge tile (one chamfered side) im Format 500 x 500 x 100 mm.

Typische Verlegung oder Einbausituation für den Artikel 3809 von WARCO - Edge tile (one chamfered side), Farbton Savannah in der Abmessung 500 x 500 x 100 mm.

Anthracite - €35,30
Brick red - €34,70
Slate grey - €34,10
Chocolate brown - €34,10
Grass green - €34,10

Format 500 x 500 x 100 mm

Product type FI (4 connectors included - slightly rounded edges - strongly profiled underside)

Compare

Discount:

Calculation of quantity

0 m²

0 piece

The product data sheet to print

The advantages of WARCO

Colourfast and UV resistant

Material and colour are resistant against UV radiation during weathering in a long-term perspective.

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Quickly and simply laid

Easy mounting without special expert knowledge on bound of fixed base courses.

Well and favourable invested money

Safe investment due to the original WARCO product with warranty - proved thousands of times.

Weatherproof - indoors and outdoors

Recommended for areas in buildings and in the open air. Assure the drainage on or in the base course.

Low-flammable (cfl-s1)

Building material class Cfl-s1 (EN 13501-1), B1 (DIN 4102-1) low-flammable, low production of smoke.

Suitable for chlorinated water

Resistant against chlorinated water or cleaners and suitable for laying at a swimming pool.

Colour
Savannah

The colour design is based on the pastel beige typical for the African savannah and lime green colour hues on a black base. The products in the colour design Savannah are made of a fully colourful EPDM granulate - colourful through and through. EPDM (Ethylene Propylene Diene Monomer) is a UV resistant, weatherproof and especially robust rubber. The subtle and pleasant colour design Savannah fits every environment with its natural wood look, unintrusively and without artificial look.

Material

Arkadiusz_Sztern_dokument_dn327296fs_da154767_icon_V.png

The tile is two-layered, but monolithic (from one piece). In the rubber granulate of the wear and visible side it's a newly manufactured, imbued EPDM (Ethylene Propylene Diene Monomer). The second, bottom layer is made of the black tyre rubber granulate Styrene-Butadiene Rubber, short SBR. This complex structure is especially favourable for the physical properties and durability of the tile.

Assembly or connection system

The tiles are laid edge to edge in the 50% offset. This means, the plates in one row are displaced a half-length of the tile towards the adjacent rows. Four plastic connectors included to each tile join the adjacent rows together. Every plate is connected to 2 tiles from the previous and 2 tiles from the next row. However, this connection is not stable and doesn't prevent the plates from drifting apart, so that the surface has to be bordered.

Structure of the underside

Contrary to the standard tiles with connectors, this tile has a homogenous cross section without structured bottom side, without formed drainage. It's laid on an appropriate, bound or unbound base course or on a plastic honeycomb grid. It can be useful to paste it on the base course. Please take note of the laying instruction.