Fall protection mat (110 cm fall height) FS "Brick red"

€56,70

7-14 days

Plus delivery costs
/
Realisation time approx.
7-14 days
€56,70 / 1 piece / m²
(28,10 kg / piece)

EAN: 4251469356658 | Item no.: 5665

The large-sized fall protection mat can be successfully used in case of large surfaces protected against weather effects. The fall protection mat, tested according to EN 1177 for a fall height of 110 cm, belongs to the basic equipment of the indoor playgrounds and climbing halls. Wherever children or adults can fall up to a drop height of 110 cm, this fall protection mat provides a permanent, maintenance-free and carefree fall protection.

The reasonably priced fall protection mat is also slip-resistant. It feels pleasantly warm to the touch and insulates against vibrations and noise. The relationship of resistance against mechanical loading and abrasion to damping, elasticity and open-pore nature is optimally adapted for the use of the tiles on normally loaded surfaces.

The product data sheet to print

Fall protection mat (110 cm fall height) von WARCO im Farbdesign Brick red mit den Abmessungen 1000 x 1000 x 40 mm. Produktfoto von Artikel 5665 in der Aufsicht von schräg vorne.

Detailaufnahme der Randausprägung von WARCO-Produkt 5665, Fall protection mat (110 cm fall height), Format 1000 x 1000 x 40 mm, Farbe Brick red.

Großaufnahme vom Verbindungssystem von WARCO-Boden 5665 - Fall protection mat (110 cm fall height) im Farbdesign Brick red. Abmessungen 1000 x 1000 x 40 mm.

Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 5665 - Fall protection mat (110 cm fall height) im Format 1000 x 1000 x 40 mm.

Typische Verlegung oder Einbausituation für den Artikel 5665 von WARCO - Fall protection mat (110 cm fall height), Farbton Brick red in der Abmessung 1000 x 1000 x 40 mm.

Anthracite - €2,90
Brick red (active)
Grass green + €2,70
Chocolate brown + €2,70
Slate grey + €2,70

Format 1000 x 1000 x 40 mm

Product type FS (4 connectors included - slightly rounded edges - strongly profiled underside)

Compare

Discount:

Calculation of quantity

0 m²

0 piece

The product data sheet to print

The advantages of WARCO

110 cm critical fall height (EN 1177:2018)

TÜV technical release certificate (2018) for 110 cm fall height. Safety for public and private playing areas.

Limitedly UV resistant

The ageing and lifetime of the product depend on the intensity of the UV radiation (sunlight).

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Quickly and simply laid

Easy mounting without special expert knowledge on bound of fixed base courses.

Well and favourable invested money

Safe investment due to the original WARCO product with warranty - proved thousands of times.

Weatherproof - indoors and outdoors

Recommended for areas in buildings and in the open air. Avoid waterlogging and assure the water outlet.

Normally inflammable (efl)

Building material class Efl (EN 13501-1), B2 (DIN 4102-1). Authority denomination: normally inflammable.

Colour
Brick red

In the colour brick red, the black rubber granulate (SBR) from the car tyres is mixed with a binder, into that a brick red colour pigment (iron oxide) was mixed. The black car tyre rubber granules are coated with the brick red colour. Brick red is a colour hue that can be found for hundreds of years in construction materials for roofs, walls and floors. According to this viewing habit, brick red products can be mounted almost everywhere.

Material

The rubber granulate with irregularly formed particles is obtained from discarded tyres. It mainly consists in the high-valuable mix of natural rubber (NR) and synthetically manufactured Styrene-Butadiene Rubber (SBR). The material properties of the WARCO preform largely correspond to those known from SBR. The granulate with an edge length from 1.0 to 3.0 mm creates fine-grained surfaces.

Assembly or connection system

The tiles are laid edge to edge in the 50% offset. This means, the plates in one row are displaced a half-length of the tile towards the adjacent rows. Four plastic connectors included to each tile join the adjacent rows together. Every plate is connected to 2 tiles from the previous and 2 tiles from the next row. However, this connection is not stable and doesn't prevent the plates from drifting apart, so that the surface has to be bordered.

Structure of the underside

The bottom side of the tile is strongly structured on the entire surface. There are symmetrically arranged "frustums" with a height of about 15 mm looking from the bottom side of the wear layer. They are functional elements leading to the optimisation of the damping and drainage. The tiles can be laid on a bound (in particular cases also on unbound) base course or on a plastic honeycomb grid. Please take note of the laying instruction.