Fall protection tile (145 cm fall height) FS "Slate grey"

€9,60

7-14 days

Plus delivery costs
/
Realisation time approx.
7-14 days
€38,40 / 4 piece / m²
(5,20 kg / piece)

EAN: 4251469355231 | Item no.: 5523

With the proven fall protection tile, you take no risks on the playground, under playground equipment or in front of the climbing wall. Because the fall protection tile, which has been tested according to EN 1177 for a fall height of 145 cm, provides lasting and maintenance-free protection against injuries from falling.

Obviously, the fall protection tile is extensively water-permeable, weatherproof, frost-resistant and slide-blocking. It can be used both indoors and outdoors. The handy tiles are laid in a half-offset pattern. The relationship of resistance against mechanical loading and abrasion to damping, elasticity and open-pore nature is optimally adapted for the use of the tiles on normally loaded surfaces.

The product data sheet to print

Fall protection tile (145 cm fall height) von WARCO im Farbdesign Slate grey mit den Abmessungen 500 x 500 x 40 mm. Produktfoto von Artikel 5523 in der Aufsicht von schräg vorne.

Detailaufnahme der Randausprägung von WARCO-Produkt 5523, Fall protection tile (145 cm fall height), Format 500 x 500 x 40 mm, Farbe Slate grey.

Großaufnahme vom Verbindungssystem von WARCO-Boden 5523 - Fall protection tile (145 cm fall height) im Farbdesign Slate grey. Abmessungen 500 x 500 x 40 mm.

Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 5523 - Fall protection tile (145 cm fall height) im Format 500 x 500 x 40 mm.

Typische Verlegung oder Einbausituation für den Artikel 5523 von WARCO - Fall protection tile (145 cm fall height), Farbton Slate grey in der Abmessung 500 x 500 x 40 mm.

Anthracite - €0,90
Brick red - €0,60
Slate grey (active)
Chocolate brown
Grass green

Format 500 x 500 x 40 mm

Product type FS (4 connectors included - slightly rounded edges - strongly profiled underside)

Compare

Discount:

Calculation of quantity

0 m²

0 piece

The product data sheet to print

The advantages of WARCO

145 cm critical fall height (EN 1177:2018)

TÜV technical release certificate (2018) for 145 cm fall height. Safety for public and private playing areas.

Limitedly UV resistant

The ageing and lifetime of the product depend on the intensity of the UV radiation (sunlight).

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Quickly and simply laid

Easy mounting without special expert knowledge on bound of fixed base courses.

Well and favourable invested money

Safe investment due to the original WARCO product with warranty - proved thousands of times.

Weatherproof - indoors and outdoors

Recommended for areas in buildings and in the open air. Assure the drainage on or in the base course.

Normally inflammable (efl)

Building material class Efl (EN 13501-1), B2 (DIN 4102-1). Authority denomination: normally inflammable.

Colour
Slate grey

During the production of slate grey products, the black rubber granulate (SBR) obtained from car tyres is mixed with a slate grey coloured binder and then pressed in a form. The black rubber particles are superficially covered with grey. Slate grey is a neutral, dark grey colour hue that fits well into modern and neutral environments.

Material

The rubber granulate with irregularly formed particles is obtained from discarded tyres. It mainly consists in the high-valuable mix of natural rubber (NR) and synthetically manufactured Styrene-Butadiene Rubber (SBR). The material properties of the WARCO preform largely correspond to those known from SBR. The granulate with an edge length from 1.0 to 3.0 mm creates fine-grained surfaces.

Assembly or connection system

The tiles are laid edge to edge in the 50% offset. This means, the plates in one row are displaced a half-length of the tile towards the adjacent rows. Four plastic connectors included to each tile join the adjacent rows together. Every plate is connected to 2 tiles from the previous and 2 tiles from the next row. However, this connection is not stable and doesn't prevent the plates from drifting apart, so that the surface has to be bordered.

Structure of the underside

The bottom side of the tile is strongly structured on the entire surface. There are symmetrically arranged "frustums" with a height of about 28 mm looking from the bottom side of the wear layer. They are functional elements leading to the optimisation of the damping and drainage. The tiles can be laid on a bound base course or on a plastic honeycomb grid. Please take note of the laying instruction.